Push-in Folding Sliding door hardware solution

Product Characteristics 

1、The door can be hidden in the storage side of the cabinet and does not occupy the space outside of the cabinet .

2、When the door is closed, the door is flat and the gap can be less than 3mm.

3、Open and close running smoothly and no noise,  two-way impact buffer damping.

4、Small opening path ,no need door pull.

5、 Standardize and easy to install ,all kits are pre-installed before sending,only turn a few screws can be finish installment.

6、The front and back of the door panel up and down left and right three-dimensional adjustable, simple structure.The door can be front-back up-down left-right three-dimension adjusted.simple structure.

7、No lower track design ,convenience to cleaning .

Application Scenarios

Wardrobes, cabinets, display cases, audio storage, washing storage, administrative corridors, etc.

Specification:

Track size: 120mm wide *60mm high

Product suitable for door width: 500~950mm(customized maximum width can reach 1200mm)

Rated load: within 100KG (customized goods maximum load up to 120KG)

Product suitable for door height: 2600mm (customized goods maximum door height can up to 3600mm)

Product suitable for door thickness: 27~40mm(customized goods maximum door thickness can up to 45mm)

Some parameters

Material: Aluminum alloy + stainless steel

Installation method: track top installation, door side hanging installation

Categories: Left door (standard track is 2.0m,can be cut ), right door (track 2.0m long can be cut), track

The door width can be cut (500-950MM).